Would using swirl remover spoil the paint job of a car if used by itself or if its followed by regular polish? - car polish singapore
Include its ok, if it should be followed by the regular wax, but what if Remover eddy was followed by regular car polish?
Car Polish Singapore Would Using Swirl Remover Spoil The Paint Job Of A Car If Used By Itself Or If Its Followed By Regular Polish?
2 comments:
Use the tub to remove the paint and then a follow-up work with wax. As the previous poster said, in Polish only for the bathtub. Polished by hand is not enough. Machine buff to remove them forever. Go to a reputable Detailer in your area for good.
This can be a trick question. Eddy in the painting should be polished as a rule with the machine and made a cut and polish qualified. Swirl Remover solves the problem temporarily, but the next time you wash the vehicle vertebrae, which is the only "full" tilt to the turbulent eddies and thus eliminated the laundry again. You can usually a good polishing and / or cutting and polishing by a business' reputation "done in detail. Be careful. You can also use your color, and once it goes the sign to be burned completely cleaned and newly painted. Hope this helps. BLACK will show marks more turbulence and very hard to keep clean.
Post a Comment